Mustang 05+ 2013 Specifications

Introduction 4Instrument Cluster 12Warning lights and chimes 12Gauges 17Message center 19Entertainment Systems 29Auxiliary input jack (Line in) 38USB

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Airbag - FrontAirbag

Vehicles equipped with traditional keys:When using a Ford-approved remote start system, the default settingswill recognize the remote start system as

TroubleshootingCondition Potential CausesCan’t create a MyKey威 • Key in the ignition is already aMyKey威.• Key in the ignition is the lastremaining adm

Condition Potential CausesLost the only admin key • Purchase a new key from yourauthorized dealer.Lost any key • For programming spare keys, referto t

Press the control to unlock alldoors.Press thecontrol to lock alldoors.Locking and unlocking with keysYour vehicle’s keys are designed to lock and unl

The autolock feature repeats when:• any door is opened then closed while the ignition is in the on positionand the vehicle speed is 9 mph (15 km/h) or

8. Turn the ignition to the off position. The horn will chirp once toconfirm the procedure is complete.Autounlock (if equipped)The autounlock feature

6. To enable/disable the autounlock feature, press the lock control, thenpress the unlock control. The horn will chirp once if autounlock wasdeactivat

WARNING: Do not leave children, unreliable adults, or animalsunattended in the vehicle. On hot days, the temperature in thetrunk or vehicle interior c

The IKT allows you to:• remotely unlock the vehicledoors.• remotely lock all the vehicledoors.• remotely open the trunk.• activate the personal alarm.

Two-stage unlocking may be disabled or re-enabled by simultaneouslypressing theand controls on the IKT for four seconds (disablingtwo stage unlock all

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleasePanic Alarm Engine Oi

Opening the trunkPresstwice to open the trunk.• Ensure that the trunk is closed and latched before driving yourvehicle. Failure to properly latch the

5. Snap the battery cover back onto the key.Note: Replacement of the battery will not cause the IKT or IA key tobecome de-programmed from your vehicle

Battery saverThe battery saver will shut off the interior lamps 10 minutes after theignition has been turned to the off position and a door is left op

Anti-theft indicatorThe anti-theft indicator is located in the instrument cluster.• When the ignition is in the offposition, the indicator will flasho

Replacing coded keys can be very costly. Store an extra programmed keyaway from the vehicle in a safe place to help prevent anyinconveniences. Please

6. Turn the ignition to the 1 (off) position and remove the secondpreviously programmed coded key from the ignition.7. After three seconds but within

The interior motion detection and vehicle incline sensing systemswill operate only when the vehicle is locked using the remotekeyless entry transmitte

Each door, the hood or the trunk is armed individually, and if any areopen, they must be closed for the system to enter the 20 secondcountdown.The tur

FRONT SEATSWARNING: Reclining the seatback can cause an occupant toslide under the seat’s safety belt, resulting in severe personalinjuries in the eve

The non-adjustable head restraintsconsist of a trimmed foam coveringover the upper structure of theseatback.Properly adjust the seatback to an upright

WARNING LIGHTS AND CHIMESBase V6 engine instrument cluster (standard measure shown,metric similar)Optional V6 and GT instrument cluster (standard meas

To adjust the head restraint, do the following:1. Adjust the seatback to an upright driving/riding position.2. Raise the head restraint bypulling up o

To remove the adjustable head restraint, do the following:1. Pull up the head restraint until itreaches the highest adjustmentposition.2. Simultaneous

WARNING: To minimize the risk of neck injury in the event of acrash, head restraints must be installed properly.Titling head restraints (if equipped)T

Pull lever up to adjust the angle ofthe seatback.Four-way seat adjust (driver side only)Pump the handle upwards to raisethe cushion and pump downward

WARNING: Sitting improperly out of position or with the seatback reclined too far can take off weight from the seat cushionand affect the decision of

Move the switch in the direction ofthe arrows to raise or lower the rearportion of the seat cushion.Press the switch in the direction ofthe arrows to

Heated seats (if equipped)WARNING: Persons who are unable to feel pain to the skinbecause of advanced age, chronic illness, diabetes, spinal cordinjur

Use the recliner handle to returnthe seatback to the desired position.REAR SEATS (IF EQUIPPED)Non-adjustable head restraintsYour vehicle is equipped w

Press the button to rotate the headrestraint forward in order toimprove rear vision when there areno rear seat occupants.2nd row seat/split-folding re

Rear seat delete (if equipped)WARNING: In a collision, passengers who are unbelted aresignificantly more likely to be seriously injured or killed. Do

Service engine soon: The serviceengine soon indicator lightilluminates when the ignition is firstturned to the on position to checkthe bulb and to ind

How does the Personal Safety System™ work?The Personal Safety System can adapt the deployment strategy of yourvehicle’s safety devices according to cr

very close to the airbag. For other occupants, this occurs when theoccupant is not properly restrained by safety belts or child safety seatsand they m

effectiveness of the safety belts. In frontal collisions, the safety beltpretensioners can be activated alone or, if the collision is of sufficientsev

WARNING: Never let a passenger hold a child on his or her lapwhile the vehicle is moving. The passenger cannot protect thechild from injury in a colli

Combination lap and shoulder beltsThe presenter arm (available on the coupe only) is intended to improveaccess to the safety belt and to allow access

2. To unfasten, press the releasebutton and remove the tongue fromthe buckle.WARNING: The center of the rear seat is NOT designed as aseating position

Safety belt locking modesAll safety restraints in the vehicle are combination lap and shoulderbelts. The driver safety belt has the first locking mode

How to disengage the automatic locking modeDisconnect the combination lap/shoulder belt and allow it to retractcompletely to disengage the automatic l

Use only extensions manufactured by the same supplier as the safetybelt. Manufacturer identification is located at the end of the webbing onthe label.

Both the driver’s and passenger’s safety belt usages are monitored andeither may activate the Belt-Minder威 feature. The warnings are the samefor the d

WARNING: Driving a vehicle with the brake system warninglight on is dangerous. A significant decrease in brakingperformance may occur. It will take yo

The following are reasons most often given for not wearing safety belts(All statistics based on U.S. data):Reasons given... Consider...“Crashes are ra

Reasons given... Consider...“I have an airbag” Airbags offer greater protection whenused with safety belts. Frontal airbagsare not designed to inflate

WARNING: While the design allows you to deactivate yourBelt-Minder威, this system is designed to improve your chances ofbeing safely belted and survivi

AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)Important SRS precautionsThe SRS is designed to work withthe safety belt to help protect thedriver and right

WARNING: Never place your arm over the airbag module as adeploying airbag can result in serious arm fractures or otherinjuries.To properly position yo

Children and airbagsChildren must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restrained in the rear

The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt

• a readiness light and tone• and the electrical wiring which connects the components• Side curtain airbag system. Refer to Side curtain airbag system

The front passenger sensing systemuses a ⬙passenger airbag off⬙ or⬙pass airbag off⬙ indicator which willilluminate and stay lit to remind youthat the

• If the indicator lamp remains lit even after this, the person should beadvised to ride in the rear seat.OccupantPass Airbag OffIndicator LampPasseng

Engine coolant temperature:Illuminates when the engine coolanttemperature is high. Stop thevehicle as soon as possible, switch off the engine and let

ObjectsPass Airbag OffIndicator LampPassenger AirbagSmall (i.e. three-ringbinder, small purse,bottled water)Unlit DisabledMedium (i.e. heavybriefcase,

In case there is a problem with thefront passenger sensing system, theairbag readiness lamp in theinstrument cluster will stay lit.If the airbag readi

WARNING: Do not use accessory seat covers. The use ofaccessory seat covers may prevent the deployment of the sideairbags and increase the risk of inju

Side airbags, in combination with safety belts, can help reduce the risk ofsevere injuries in the event of a significant side impact collision.The sid

Determining if the system is operationalThe SRS uses a readiness light in the instrument cluster or a tone toindicate the condition of the system. Ref

SAFETY RESTRAINTS FOR CHILDRENSee the following sections for directions on how to properly use safetyrestraints for children. Also see Airbag suppleme

Recommendations for Safety Restraints for ChildrenChild size, height, weight, orageRecommendedrestraint typeInfants ortoddlersChildren weighing 40 lb

Recommendations for attaching child safety restraints for childrenRestraintTypeChildWeightUse any attachment method as indicatedbelow by “X”LATCH(lowe

WARNING: Never let a passenger hold a child on his or her lapwhile the vehicle is moving. The passenger cannot protect thechild from injury in a colli

Follow all the safety restraint and airbag precautions that apply to adultpassengers in your vehicle.If the child is the proper height, age, and weigh

Speed control: Illuminates whenthe speed control is engaged. Turnsoff when the speed control systemis disengaged.Door ajar: Illuminates when theigniti

Installing child safety seats with combination lap and shoulderbeltsCheck to make sure the child seat is properly secured before each use.Children 12

1. Position the child safety seat in aseat with a combination lap andshoulder belt.2. Pull down on the shoulder beltand then grasp the shoulder beltan

4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) for that seating position untilyou hear

towards the buckle will additionally help to remove remaining slack fromthe belt.9. Attach the tether strap (if the child seat is equipped). Refer toA

Your vehicle may have LATCH lower anchors for child seat installation atthe seating positions marked with the child seat symbol.The LATCH anchors (if

Combining safety belt and LATCH lower anchors for attachingchild safety seatsWhen used in combination, either the safety belt or the LATCH loweranchor

Vehicles without rear seatsAttach the tether strap only to the appropriate tether anchor as shown.The tether strap may not work properly if attached s

2. Locate the correct anchor for theselected seating position.3. Open the tether anchor cover.Seating and Safety Restraints1672012 05+ Mustang (197)Ow

4. Clip the tether strap to theanchor as shown.If the tether strap is clippedincorrectly, the child safety seat maynot be retained properly in theeven

Note: The attachments for theconvertible boot located on the backof the head restraints are not tetheranchors.2. Access tether anchors locatedbehind t

GAUGESBase V6 engine instrument cluster (standard measure shown,metric similar)1 2 3 4Instrument Cluster172012 05+ Mustang (197)Owners Guide, 3rd Prin

3. Clip the tether strap to theanchor as shown.If the tether strap is clippedincorrectly, the child safety seat maynot be retained properly in theeven

Booster seats position a child so that vehicle lap/shoulder safety belts fitbetter. They lift the child up so that the lap belt rests low across the h

Types of booster seatsThere are generally two types of belt-positioning booster seats: backlessand high back. Always use booster seats in conjunction

Children and booster seats vary in size and shape. Choose a booster thatkeeps the lap belt low and snug across the hips, never up across thestomach, a

The importance of shoulder beltsUsing a booster without a shoulder belt increases the risk of a child’shead hitting a hard surface in a collision. For

INFORMATION ABOUT UNIFORM TIRE QUALITY GRADINGTire Quality Grades apply to newpneumatic passenger car tires. TheQuality grades can be found whereappli

Temperature A B CWARNING: The temperature grade for this tire is establishedfor a tire that is properly inflated and not overloaded. Excessivespeed, u

• kPa: Kilopascal, a metric unit of air pressure.• PSI: Pounds per square inch, a standard unit of air pressure.• Cold inflation pressure: The tire pr

WARNING: Under-inflation is the most common cause of tirefailures and may result in severe tire cracking, tread separationor “blowout”, with unexpecte

Note: If you have to drive a distance to get air for your tire(s), checkand record the tire pressure first and add the appropriate air pressurewhen yo

Optional V6 and GT instrument cluster (standard measure shown,metric similar)Refer to Message center in this chapter to select preset colors or userde

Improper or inadequate vehicle maintenance can cause tires to wearabnormally. Inspect all your tires, including the spare, frequently, andreplace them

U.S. DOT Tire Identification Number (TIN)Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the s

WARNING: When mounting replacement tires and wheels, youshould not exceed the maximum pressure indicated on thesidewall of the tire to set the beads w

Safety PracticesWARNING: If your vehicle is stuck in snow, mud, sand, etc., donot rapidly spin the tires; spinning the tires can tear the tire andcaus

The tires should also be balanced periodically. An unbalanced tire andwheel assembly may result in irregular tire wear.Tire RotationRotating your tire

Information on “P” type tiresP215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (

7. H: Indicates the tire’s speed rating. The speed rating denotes thespeed at which a tire is designed to be driven for extended periods oftime under

9. M+S or M/S: Mud and Snow, orAT: All Terrain, orAS: All Season.10. Tire Ply Composition and Material Used: Indicates the number ofplies or the numbe

Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;

Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8

5. Engine oil pressure gauge (optional V6 and GT cluster only):Indicates engine oil pressure. The needle should stay in the normaloperating range (bet

TIRE PRESSURE MONITORING SYSTEM (TPMS)Each tire, including the spare (ifprovided), should be checkedmonthly when cold and inflated tothe inflation pre

following two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference received,including inter

To restore the full functionality of the tire pressure monitoring system,have the damaged road wheel/tire repaired and remounted on yourvehicle. For a

Low tirepressurewarning lightPossible cause Customer action requiredFlashingwarning lightSpare tire in use Repair the damaged road wheel/tireand reins

SNOW TIRES AND CHAINSWARNING: Driving too fast for conditions creates the possibilityof loss of vehicle control. Driving at very high speeds forextend

SUMMER TIRESYour Ford vehicle may be equipped with summer tires to providesuperior performance on wet and dry roads. Summer tires do not havethe Mud a

Payload – is the combined weight of cargo and passengers that thevehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Lab

Example only:Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue load

GAW (Gross Axle Weight) – is the total weight placed on each axle(front and rear) – including vehicle curb weight and all payload.GAWR (Gross Axle Wei

• Example only:WARNING: Exceeding the Safety Compliance Certification Labelvehicle weight rating limits could result in substandard vehiclehandling or

Seating and Safety Restraints 118Seating 118Personal Safety System™ 129Safety belt system 132Airbags 143Child restraints 155Tires, Wheels and Loading

MYKEY MILES (km)For more information, refer to MyKey威 in the Locks and Securitychapter.MILES (km) TO EThis displays an estimate of approximately how f

GCW (Gross Combined Weight) – is the weight of the loaded vehicle(GVW) plus the weight of the fully loaded trailer.GCWR (Gross Combined Weight Rating)

Steps for determining the correct load limit:1. Locate the statement “The combined weight of occupants and cargoshould never exceed XXX kg or XXX lbs.

calculation would be: 635 kg - (2 x 99 kg) - (12 x 45 kg) = 635 - 198 -540 = -103 kg. You will need to reduce the load weight by at least240 lb. (104

WARNING: Do not exceed the GVWR or the GAWR specified onthe certification label.WARNING: Towing trailers beyond the maximum recommendedgross trailer w

Trailer lampsTrailer lamps are required on most towed vehicles. Make sure all runninglights, brake lights, turn signals and hazard lights are working.

RECREATIONAL TOWINGFollow these guidelines if you have a need for recreational (RV) towing.An example of recreational towing would be towing your vehi

STARTINGPositions of the ignition1. Off — locks the automatictransmission gearshift lever andallows key removal. Note: In orderto switch off the engin

WARNING: Do not park, idle, or drive your vehicle in dry grassor other dry ground cover. The emission system heats up theengine compartment and exhaus

If starting a vehicle with an automatic transmission:• Make sure the gearshift is in P(Park).• Make sure the parking brake isset.If starting a vehicle

3. Turn the key to 3 (on) withoutturning the key to 4 (start).Some warning lights will briefly illuminate. See Warning lights andchimes in the Instrum

MPG (L/km)This displays instantaneous fuel economy as a bar graph ranging from ↓poor economy to ↑ excellent economy.Your vehicle must be moving to cal

Guarding Against Exhaust FumesWARNING: If you smell exhaust fumes inside your vehicle, havethis checked immediately. Do not drive your vehicle if you

• Do not use multiple extension cords. Instead, use one extension cordwhich is long enough to reach from the engine block heater cord tothe outlet wit

BRAKESOccasional brake noise is normal. If a metal-to-metal, continuous grindingor continuous squeal sound is present, the brake linings may be worn-o

Parking brakeTo set the parking brake (1), pullthe parking brake handle up as faras possible.The BRAKE warning lamp willilluminate and will remainillu

WARNING: Vehicle modifications involving braking system,aftermarket roof racks, suspension, steering system, tireconstruction and/or wheel/tire size m

The AdvanceTrac威 system includesa stability control button located onthe center console, a stabilitycontrol light and a stability controloff light in

If the TCS is activated excessively in a short period of time, the brakingportion of the system may become temporarily disabled to allow thebrakes to

The stability control button can beused to enable uniqueAdvanceTrac威 modes.Full features of the AdvanceTrac威system can be restored by pressing the sta

AdvanceTrac威 Sport Mode (if equipped)The AdvanceTrac威 system provides an available sport mode on somemodels. This can be selected utilizing the stabil

After selecting the desired setting, you may feel a soft feedback bump inthe steering wheel when the changeover occurs.Note: If the battery is disconn

7. MYKEY DISTANCE (if MyKey威 is programmed)8. MYKEY(S) PROGRAMMED9. ADMIN KEYS PROGRAMMEDNote: Some systems show a message only if a condition is pres

If you cannot move the gearshift lever out of P (Park) with ignition inthe on position and the brake pedal pressed:1. Apply the parking brake.2. Using

AUTOMATIC TRANSMISSION (IF EQUIPPED)Driving with a 6-speed automatic transmissionYour vehicle has been designed to improve fuel economy by reducingfue

N (Neutral)With the gearshift lever in N (Neutral), the vehicle can be started and isfree to roll. Hold the brake pedal down while in this position.D

• To return to D (Drive) standard mode or 3 (Third), move thetransmission shift lever into the D (Drive) or 3 (Third) position.• Selecting 2 (Second)

To start the vehicle:1. Make sure the parking brake is fully set.2. Press the clutch pedal to thefloor, then put the gearshift lever inthe neutral pos

For the 3.7L V6 with 3.31 axle ratio, shift according to the followingchart:Upshifts when accelerating (recommended for best fuel economy)Shift from:1

2. Press the clutch pedal to the floor to disengage clutch.3. Shift into R (Reverse) by pushingthe gearshift knob down, thenmoving the lever fully to

WARNING: To help avoid personal injury, always use cautionwhen in R (Reverse) and when using the RSS.WARNING: This system is not designed to prevent c

Keep the RSS sensors (located on the rear bumper/fascia) freefrom snow, ice and large accumulations of dirt (do not clean thesensors with sharp object

Image delay if displayed through the navigation screen:After shifting out of R (Reverse) and into any gear other than P (Park),the image in the naviga

Press and hold RESET to turn the feature on or off.AMBIENT DIMUse this to adjust the brightness of the ambient lighting.Press RESET to choose the vari

Servicing• If the image comes on while the vehicle is not in R (Reverse), havethe system inspected by your authorized dealer.• If the image is not cle

DRIVING THROUGH WATERIf driving through deep or standingwater is unavoidable, proceed veryslowly. Never drive through waterthat is higher than the bot

ROADSIDE ASSISTANCEVehicles sold in the U.S. : Getting roadside assistanceTo fully assist you should you have a vehicle concern, Ford MotorCompany off

Vehicles sold in the U.S. : Using roadside assistanceComplete the roadside assistance identification card and place it in yourwallet for quick referen

FUEL PUMP SHUT-OFFIn the event of a moderate to severe collision, this vehicle is equippedwith a fuel pump shut-off feature that stops the flow of fue

Standard fuse amperage rating and colorCOLORFuseratingMinifusesStandardfusesMaxifusesCartridgemaxifusesFuse linkcartridge2A Grey Grey — — —3A Violet V

Passenger compartment fuse panelThe fuse panel is located in the lower passenger side area behind thekick panel. Open the trim panel door and remove t

Fuse/RelayLocationFuse AmpRatingProtected Circuits6 20A Turn signals, Hazard flashers7 10A Left low beam headlamp8 10A Right low beam headlamp9 15A Co

Fuse/RelayLocationFuse AmpRatingProtected Circuits35 10A Auxiliary body module (ABM)run/start36 5A Passive anti-theft system (PATS)37 10A Not used (sp

WARNING: Always disconnect the battery before servicing highcurrent fuses.WARNING: To reduce risk of electrical shock, always replacethe cover to the

To enter the MyColor威 adjust mode, do the following (vehicle must bestationary):1. Press and hold RESET for three seconds at the MyColor 1, 2 or 3menu

Fuse/RelayLocationFuse AmpRatingProtected Circuits9 30A* Wipers10 30A* ABS valve11 — Not used12 — Not used13 20A** Fuel pump relay (non-Shelby)25A** F

Fuse/RelayLocationFuse AmpRatingProtected Circuits36 Diode Fuel diode37 — Not used38 15A** Fuel injectors (Shelby only)39 5A** Rear defroster coil (ru

Auxiliary relay with heated seats (if equipped)On heated seat equipped vehicles, there is a relay box located under thedriver seat containing two rela

A dissimilar spare tire/wheel is defined as a spare tire and/or wheel thatis different in brand, size or appearance from the road tires and wheelsand

The usage of a full-size dissimilar spare tire/wheel can lead toimpairment of the following:• Handling, stability and braking performance• Comfort and

WARNING: If the vehicle slips off the jack, you or someone elsecould be seriously injured.WARNING: Do not attempt to change a tire on the side of thev

3. Remove the center ornament (ifequipped) from the wheel. Looseneach wheel lug nut one-half turncounterclockwise but do not removethem until the whee

6. Replace the flat tire with the spare tire, making sure the valve stem isfacing outward. Reinstall lug nuts until the wheel is snug against the hub.

1. Air compressor (inside)2. Diverter knob3. On/Off button4. Air pressure gauge5. Sealant bottle/canister6. Sealant filling clear tube7. Sealant tube

• Drive carefully and avoid abrupt steering maneuvers.• Periodically monitor tire inflation pressure in the affected tire; if thetire is losing pressu

CREATE MYKEY / MYKEY SETUP/ CLEAR MYKEYFor more information refer to MyKey威 in the Locks and Securitychapter.LANGUAGE = ENGLISH / SPANISH / FRENCHAllo

• When inflating a tire or other objects, use the black air hose only. Donot use the transparent hose which is designed for sealant applicationonly.•

4. Plug the power cable into the 12Vpower point in the vehicle.5. Remove the warning sticker found on the canister and place it on thetop of the instr

Note: When the sealing compound is first added into the tire, theair pressure gauge reading on the compressor unit may indicate ahigher value; this is

3. Turn the dial clockwise to the air position. Turn on the kit by pressingthe on/off button.4. Adjust the tire to therecommended inflation pressurefr

Removal of the sealant canister from the temporary mobility kit1. Unwrap the clear tube from thecompressor housing.2. Press the button located on thet

2. Once aligned, seat the sealantcanister by lightly pushing downuntil you hear an audible click.3. Wrap the clear tube around thecompressor housing.N

WHEEL LUG NUT TORQUE SPECIFICATIONSRetighten the lug nuts to the specified torque within 100 miles (160 km)after any wheel disturbance (rotation, flat

WARNING: Do not insert the nozzle of portable fuel containersor aftermarket funnels into the Easy Fuel威 system. This coulddamage the fuel system and i

Connecting the jumper cablesNote: In the illustration, the vehicle on the bottom is used to designatethe assisting (boosting) battery.1. Connect the p

Jump starting1. Start the engine of the booster vehicle and run the engine atmoderately increased speed.2. Start the engine of the disabled vehicle.3.

CHECK FUEL FILL INLET — Displayed when the fuel fill inlet maynot be properly closed. Refer to Easy Fuel威 “no cap” fuel system in theMaintenance and S

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

If the vehicle is towed by other means or incorrectly, vehicledamage may occur.Ford Motor Company produces a towing manual for all authorized towtruck

GETTING THE SERVICES YOU NEEDWarranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehi

In Canada:Mailing addressCustomer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4Telephone1-800-565-367

IN CALIFORNIA (U.S. ONLY)California Civil Code Section 1793.2(d) requires that, if a manufactureror its representative is unable to repair a motor veh

THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM(U.S. ONLY)Your satisfaction is important to Ford Motor Company and to your dealer.If a warranty con

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY)For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to fee

If your vehicle must be serviced while you are traveling or living inAsia-Pacific Region, Sub-Saharan Africa, U.S. Virgin Islands, CentralAmerica, the

If your vehicle must be serviced while you are traveling or living in theMiddle East, contact the nearest authorized dealer. If the authorizeddealer c

Obtaining a French Owner’s GuideFrench Owner’s Guides can be obtained from your authorized dealer orby contacting Helm, Incorporated using the contact

SERVICE ADVANCETRAC — Displayed when the AdvanceTrac威system has detected a condition that requires service.ENGINE OIL CHANGE SOON — Displayed when the

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft威 Detail Wash (ZC-3-A), which i

WAXING• Wash the vehicle first.• Use a quality wax that does not contain abrasives.• Do not allow paint sealant to come in contact with any non-body(l

ENGINEEngines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal. When washing:•Take care when u

5.0L V8 ENGINEPLASTIC (NON-PAINTED) EXTERIOR PARTSUse only approved products to clean plastic parts. These products areavailable from your authorized

D, or F)] in Canada, available from your authorized dealer. Thiswasher fluid contains special solution in addition to alcohol whichhelps to remove the

• Do not allow air fresheners and hand sanitizers to spill on interiorsurfaces. If a spill occurs, wipe off immediately. Damage may not becovered by y

WARNING: Do not use cleaning solvents, bleach or dye on thevehicle’s safety belts, as these actions may weaken the beltwebbing.WARNING: On vehicles eq

FORD AND LINCOLN CAR CARE PRODUCTSYour Ford or Lincoln authorized dealer has many quality productsavailable to clean your vehicle and protect its fini

SERVICE RECOMMENDATIONSTo help you service your vehicle, we provide scheduled maintenanceinformation which makes tracking routine service easy.If your

OPENING THE HOOD1. Inside the vehicle, pull the hoodrelease handle located on thedriver’s side kick panel.2. Go to the front of the vehicle and releas

TOP SPEED MYKEY SETTING — Displayed when a MyKey威 is in useand the MyKey speed limit is on and the vehicle speed is 80 mph(130 km/h). Refer to MyKey威

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT3.7L V6 engine1. Battery2. Engine oil dipstick3. Engine oil filler cap4. Brake fluid reservoir5. Air f

5.0L V8 engine1. Battery2. Engine oil filler cap3. Engine oil dipstick4. Brake fluid reservoir5. Air filter assembly6. Engine coolant reservoir7. Wind

Engine shieldSome vehicles may be equipped with an aero-shield under the engine.Remove the front fasteners of the shield to gain access for service. T

CHANGING THE WIPER BLADES1. Pull the wiper blade and armaway from the glass.2. Squeeze the locking tabs torelease the blade from the arm andpull the b

5. Locate and carefully remove the engine oil level dipstick.• 3.7L V6 engine• 5.0L V8 engine - Locate theengine oil dipstick by reachingbetween the s

6. Wipe the dipstick clean. Insert the dipstick fully, then remove it again.• If the oil level is between the lower and upper holes, the oil levelis a

Use SAE 5W-20 engine oilOnly use oils certified for gasoline engines by the American PetroleumInstitute (API). An oil with this trademark symbol confo

BATTERYYour vehicle is equipped with a Motorcraft威 maintenance-free batterywhich normally does not require additional water during its life ofservice.

WARNING: Keep batteries out of reach of children. Batteriescontain sulfuric acid. Avoid contact with skin, eyes or clothing.Shield your eyes when work

If the battery has been disconnected or a new battery has been installed,the clock and the preset radio stations must be reset once the battery isreco

AUDIO SYSTEMSAM/FM Single CD/MP3 satellite-compatible sound systemWARNING: Driving while distracted can result in loss of vehiclecontrol, accident and

When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the FULL COLD level, or within theCOLD

• DO NOT MIX different colors or types of coolant in your vehicle.Make sure the correct coolant is used. Mixing of engine coolants mayharm your engine

3. Step back while the pressure releases.4. When you are sure that all the pressure has been released, use thecloth to turn it counterclockwise and re

Severe climatesIf you drive in extremely cold climates:• It may be necessary to increase the coolant concentrationabove 50%.• NEVER increase the coola

If the engine reaches a preset over-temperature condition, the enginewill automatically switch to alternating cylinder operation. Each disabledcylinde

FUEL FILTERYour vehicle is equipped with a lifetime fuel filter that is integrated withthe fuel tank. Regular maintenance or replacement is not needed

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek med

Use the following guidelines to avoid electrostatic charge build-up whenfilling an ungrounded fuel container:• Place approved fuel container on the gr

At the next opportunity, safely pull off the road, turn off the engine,open the fuel filler door and remove any visible debris from the fuel fillopeni

Do not be concerned if your engine sometimes knocks lightly. However, ifit knocks heavily under most driving conditions while you are using fuelwith t

Cleaning 270Maintenance and Specifications 278Engine compartment 280Engine oil 283Battery 287Engine coolant 289Fuel information 295Air filter(s) 309Pa

AM/FM radio/ VOL (Power/Volume): Pressto turn the radio on/off. Turn theknob to increase/decrease volume.If the volume is set above a certainlevel and

If you have run out of fuel:• You may need to cycle the ignition from off to on several times afterrefueling to allow the fuel system to pump the fuel

3. Fill the vehicle with fuel from the portable fuel container.4. When done, clean the funnel or properly dispose of it. Extra funnelscan be purchased

• Use a known quality gasoline, preferably a national brand.• Have the vehicle loading and distribution the same every time.Your results will be most

• Driving at reasonable speeds (traveling at 55 mph [88 km/h] uses 15%less fuel than traveling at 65 mph [105 km/h]).• Revving the engine before turni

• Close windows for high speed driving.EMISSION CONTROL SYSTEMWARNING: Do not park, idle, or drive your vehicle in dry grassor other dry ground cover.

Do not make any unauthorized changes to your vehicle or engine. Bylaw, vehicle owners and anyone who manufactures, repairs, services,sells, leases, tr

Readiness for Inspection/Maintenance (I/M) testingSome state/provincial and local governments may haveInspection/Maintenance (I/M) programs to inspect

BRAKE/CLUTCH FLUIDBrake and clutch (if equipped) systems are supplied from the samereservoir.The fluid level will drop slowly asthe brakes wear, and w

Checking and adding manual transmission fluid (if equipped)1. Clean the filler plug. It is locatedon the passenger side of thetransmission.2. Remove t

Use only fluid that meets Ford specifications. Refer to Maintenanceproduct specifications and capacities in this chapter.AIR FILTERRefer to scheduled

initiate or press OK to immediately initiate the search. If you pressanother control within those five seconds, the search will not initiate.The 10 st

4. Install a new air filter element. Be careful not to crimp the filterelement edges between the air filter housing and cover. This could causefilter

Engine• The engine oil and filter should be changed prior to storage, as usedengine oil contain contaminates that may cause engine damage.• Start the

• Move vehicles at least 25 feet (8 m) every 15 days to lubricateworking parts and prevent corrosion.Removing vehicle from storageWhen your vehicle is

MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIESItem CapacityFord part name orequivalentFord part number /Ford SpecificationBrake fluid and (clutchfl

Item CapacityFord part name orequivalentFord part number /Ford SpecificationEngine oil(3.7L engine)6.0 quarts (5.7L)•Motorcraft威 SAE 5W-20Premium Synt

Item CapacityFord part name orequivalentFord part number /Ford SpecificationWindshield washer fluid Fill as requiredMotorcraft威 PremiumWindshield Wash

ENGINE DATAEngine 3.7L V6 Engine 5.0L V8 EngineCubic inches 227 302Required fuel Minimum 87 octane Minimum 87 octaneFiring order 1-4-2-5-3-6 1-5-4-8-6

• 5.0L V8 engineIDENTIFYING YOUR VEHICLESafety Compliance Certification LabelThe National Highway Traffic SafetyAdministration Regulations requirethat

Vehicle identification number (VIN)The vehicle identification number islocated on the driver sideinstrument panel.Please note that in the graphic,XXXX

TRANSMISSION CODE DESIGNATIONSYou can find a transmission code onthe Safety Compliance CertificationLabel. The following table tells youwhich transmis

LOAD: This control is notoperational. To load a CD, simplyinsert the disc, label side up, intothe CD slot./ Play/Pause: Press toplay/pause a track whe

FORD CUSTOM ACCESSORIES FOR YOUR VEHICLEA wide selection of Ford Custom Accessories are available for yourvehicle through your local Ford or Ford of C

Interior style•Floor mats •Illuminated gear shift knob*•Sport pedals •Illuminated door sill plates•Flexible visor storage system (tissue dispenser, or

• The Federal Communications Commission (FCC) and Canadian RadioTelecommunications Commission (CRTC) regulate the use of mobilecommunications systems

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY)More than 32 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the

Ford ESP Can Quickly Pay for ItselfOne service bill – the cost of parts and labor – can easily exceed theprice of your Ford ESP Service Contract. With

Ford Extended Service Plan3252012 05+ Mustang (197)Owners Guide, 3rd PrintingUSA (fus)

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY)You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is

GENERAL MAINTENANCE INFORMATIONWhy maintain your vehicle?Carefully following this schedule helps protect against major repairexpenses resulting from n

Your vehicle is very sophisticated and built with multiple complexperformance systems. Every manufacturer develops these systems usingdifferent specif

Genuine Ford parts and serviceWhen planning your maintenance services, consider your dealership forall your vehicle’s needs.There are a lot of reasons

In TEXT MODE: Sometimes the display requires additional text to bedisplayed. When the</>indicatorisactive,pressTEXT and thenpressSEEK to view th

Any adverse condition should be brought to the attention of your dealeror qualified service technician as soon as possible for the proper serviceadvic

Multi-point inspectionIn order to keep your vehicle running right, it is important to have thesystems on your vehicle checked regularly. This can help

Scheduled Maintenance3322012 05+ Mustang (197)Owners Guide, 3rd PrintingUSA (fus)

NORMAL SCHEDULED MAINTENANCE AND LOGIntelligent Oil Life Monitor™ – 3.7L and 5.0L EnginesYour vehicle is equipped with an Intelligent Oil Life Monitor

Normal Scheduled MaintenanceAt every oil changeinterval as indicated bythe message centerChange engine oil and filterRotate tires, inspect tire wear a

Additional maintenance items1Miles (x 1,000) 20 30 40 60 80 90 100 120 140 150Kilometers (x 1,000) 32 48 64 96 128 144 160 192 225 240Replace cabin ai

Maintenance schedule logDEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDAT

DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HO

DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HO

SPECIAL OPERATING CONDITIONS – 3.7L AND 5.0L ENGINESIf you operate your vehicle primarily in any of the following conditions,you need to perform addit

SEEK: Press SEEK to seekto the previous/next channel. If aspecific category is selected, (Jazz,Rock, News, etc.),pressSEEK to seek to the previous/nex

Example #1: The OIL CHANGE REQUIRED message comes on at28,751 miles (46,270 km); perform the 30,000 mile (48,000 km)automatic transmission fluid repla

Special operating condition logDEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER

DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HOURS:DAT E:MILEAGE:DEALER VALIDATION:P&A CODE:RO#: HO

EXCEPTIONSThere are several exceptions to the Normal Schedule. They are listedbelow:Normal vehicle axle maintenance: Rear axles and power take-off(PTO

Edge/MKX AWD only – vehicles operating off-road in sand during highambient temperatures must replace the AWD PTU (All-wheel drivePower Transfer Unit)

AAccessory delay ...78AdvanceTrac ...213AdvanceTrac Sport Mode ...218Airbag supplemental restr

attaching with tether straps ..165in front seat ...160in rear seat ...160LATCH ...

cleaning ...272coolant ...289fail-safe cooling ...293idle speed

Inspection/maintenance (I/M)testing ...306Instrument panelcleaning ...274cluster

Parking brake ...213Parts(see Motorcraft威 parts) ...312Passenger OccupantClassification Sensor ...130Po

SATELLITE RADIO MENU: PressMENU when satellite radio mode isactive to access. Press OK to enterinto the satellite radio menu. PressSEEK to cycle throu

Steering wheelcontrols ...82tilting ...71Stereo6-CD in dash ...

c. DELETE ALL SONGS?: Press OK to delete all song’s from thesystem’s memory. The display will read ARE YOU SURE? Press OK toconfirm deletion of all sa

d. RESET PIN: Press OK when RESET PIN is displayed. The displaywill read ARE YOUR SURE. Press OK again to automatically reset thePIN to its initial pa

Extra featuresAUX: Press repeatedly to cyclethrough LINE (auxiliary audiomode) and SYNC威 (if equipped).For auxiliary jack location and further informa

Your vehicle is equipped with anauxiliary input jack (AIJ) located inthe center console. The auxiliaryinput jack provides a way to connectyour portabl

CONGRATULATIONSCongratulations on acquiring your new Ford. Please take the time to getwell acquainted with your vehicle by reading this handbook. The

7. Adjust the sound on your portable music player until it reaches thelevel of the FM station or CD by switching back and forth between theAUX and FM

Your vehicle may be equipped with aUSB port inside your center console.This feature allows you to plug inmedia playing devices, memorysticks, and also

CD/CD player careDo:• Handle discs by their edges only.(Never touch the playingsurface).• Inspect discs before playing.• Clean only with an approved C

CDs with homemade paper(adhesive) labels should not beinserted into the CD player asthe label may peel and cause theCD to become jammed. It isrecommen

Sample MP3 structureIf you are burning your own MP3discs, it is important to understandhow the system will read thestructures you create. While variou

• Terrain: Hills, mountains, tall buildings, bridges, tunnels, freewayoverpasses, parking garages, dense tree foliage and thunderstorms caninterfere w

Radio Display Condition Action RequiredACQUIRING Radio requires morethan two seconds toproduce audio for theselected channel.No action required.This m

Radio Display Condition Action RequiredNO SIGNAL Loss of signal fromthe SIRIUS威 satelliteor SIRIUS威 tower tothe vehicle antenna.You are in a locationt

MANUAL HEATING AND AIR CONDITIONING SYSTEM(IF EQUIPPED)Temperature conversion: To switch between Fahrenheit and Celsius,refer to Message center in the

5. Recirculated air: Press to activate/deactivate air recirculation inthe vehicle. Recirculated air may reduce the amount of time needed tocool down t

Warning symbols on your vehicleWhen you see this symbol, it isimperative that you consult therelevant section of this guide beforetouching or attempti

• To improve the A/C cool down, drive with the windows slightly openfor 2-3 minutes after start up or until the vehicle has been “aired out.”• A small

DUAL ZONE AUTOMATIC TEMPERATURE CONTROL(NAVIGATION-BASED) (IF EQUIPPED)Temperature conversion: To switch between Fahrenheit and Celsius,refer to Messa

5. Passenger heated seat (if equipped): Press to control thepassenger heated seat. Refer to Heated seats in the Seating and SafetyRestraints chapter f

TOUCHSCREEN FUNCTIONSTemperature conversion: To switch between Fahrenheit and Celsius,refer to Message center in the Instrument Cluster chapter.Temper

Operating tips• To reduce fog build-up on the windshield during humid weather,select(defrost). Temperature and/or fan speed can also beincreased to im

REAR WINDOW DEFROSTERRPress the control to clear the rear window of thin ice and fog. The LEDwill illuminate.The rear window defroster turns off autom

HEADLAMP CONTROLTurns the lamps off.Turns on the parking lamps,instrument panel lamps, licenseplate lamps and tail lamps.Turns the low beam headlampso

The autolamp system also keeps the lights on for a predeterminedamount of time after the ignition switch is turned to off. You can changethe amount of

High beams• Push the lever toward theinstrument panel to activate.• Pull the lever toward you todeactivate.Flash-to-passPull toward you, to the first

PANEL DIMMER CONTROLUse to adjust the brightness of theinstrument panel and all applicableswitches in the vehicle duringheadlamp and parking lampopera

Drive your new vehicle at least 100 miles (160 km) before performingextended wide open throttle maneuvers and at least 1,000 miles(1,600 km) before to

Vertical aim adjustment1. Park the vehicle directly in front of a wall or screen on a level surface,approximately 25 feet (7.6 meters) away.• (1) 8 fe

4. Locate the vertical adjuster on each headlamp.• Halogen headlamp (1)• HID headlamp (2)5. Then usea7mmAllenwrench or a Phillips screwdriver to adjus

INTERIOR LAMPSDome/Map lampsThe dome lamp lights when:.• any door is opened.• any of the remote entry controlsare pressed and the ignition isoff.• the

BULB SPECIFICATION CHARTReplacement bulbs are specified in the chart below. Headlamp bulbsmust be marked with an authorized “D.O.T.” for North America

Replacing headlamp bulbsTo remove the headlamp bulb:1. Make sure headlamp switch is in the off position, then open the hood.2. Disconnect the electric

Replacing front parking lamp/turn signal bulbs1. Make sure the headlamp control is in the off position and open thehood.Halogen headlampHID headlamp2.

Replacing front sidemarker bulb1. Make sure the headlamp control is in the off position.2. Remove the hex head screwsattaching the underbody forwardae

3. Unbolt the three tail lampattachment nuts and remove thelamp assembly.4. Rotate the LED assemblycounterclockwise and remove itfrom the lamp assembl

Replacing rear sidemarker lamp bulbs1. Make sure the headlamp switch isin the off position and locate thesidemarker on the rear bumperfascia.2. Insert

Replacing fog lamp bulbs (GT-CS) (if equipped)1. Make sure the headlamp control is in the off position and open thehood.2. Remove the underbody airdef

your vehicle. For U.S. only (if equipped), if you choose to use the SYNC威Vehicle Health Report, you consent that certain diagnostic informationmay als

MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the

TILT STEERING WHEELTo adjust the steering wheel:1. Hold the steering wheel with onehand. With the other hand, push thelever down to unlock the steerin

Flexible visor storage system (if equipped)Visors equipped with the flexible visor storage system can accommodatevarious storage accessories. A sungla

Compass zone adjustment1. Determine which magnetic zoneyou are in for your geographiclocation by referring to the zonemap.2. Turn ignition to the on p

2. To calibrate, press and hold the 7and 9 radio preset buttons togetherfor approximately 10 seconds untilCAL appears. Release the buttons.3. Slowly d

AUXILIARY POWER POINT (12V DC)Power outlets are designed for accessory plugs only. Do not insertany other object in the power outlet as this will dama

WARNING: When closing the power windows, you should verifythey are free of obstructions and ensure that children and/orpets are not in the proximity o

Bounce-back override (front windows only)To override bounce-back, within two seconds after reaching bounce-backposition, if the switch is moved from t

Rear power windows manual override (convertible only)The rear quarter window switch will not operate under the followingconditions:• Convertible top i

Do not block the sensors on the front and back of the interiorrear view mirror since this may impair proper mirrorperformance.Note: A rear center pass

To read data recorded by an EDR, special equipment is required,and access to the vehicle or the EDR is needed. In addition to thevehicle manufacturer,

Using speed controlsThe speed controls are located on the steering wheel. The followingbuttons work with speed control:Base controlsOptional controlsO

Disengaging speed controlTo disengage the speed control, tap the brake pedal or clutch pedal (ifequipped).Disengaging the speed control will not erase

STEERING WHEEL CONTROLS (IF EQUIPPED)With navigation system(if equipped)• Pressto use the voicecommand features.For further information on usingvoice

• Press OK to confirm selections various audio and SYNC威 selections.For further information on the SYNC威 system, refer to the SYNC威supplement.• Presst

Additional Car2U威 system information can be found on-line atwww.learcar2U.com or by calling the toll-free Car2U威 system help line at1-866-572-2728.Typ

Note: Do not program the Car2U威 system with the vehicle in the garage.Make sure that your key is on and engine off while programming thetransmitter.1.

After successful programming, you will be able to operate your Car2U威system by pressing the button you programmed to activate the opener.The indicator

Switchposition 12345678 9101112Up, onor +LLLLLLLLLLLLMiddle,neutralor 0MMMMMMMMMMMMDown,offor–RRRRRRRRRRRRL=left; M=middle; R=right3. To input these p

After successful programming, you will be able to operate your Car2U威system by pressing the button you programmed to activate the opener.The indicator

POSITIVE RETENTION FLOOR MATWARNING: Always use floor mats that are designed to fit thefoot well of your vehicle. Only use floor mats that leave the p

CELL PHONE USEThe use of mobile communications equipment has become increasinglyimportant in the conduct of business and personal affairs. However,dri

WARNING (Continued)• Failure to properly follow floor mat installation or attachmentinstructions can potentially cause interference with pedal operati

Note: The latch handles must bepulled downward fully to allow thelatch to fully rotate into the openposition.3. Unclamp the top from thewindshield hea

Installation of the boot (if equipped)Be sure the boot is secure on the vehicle before driving.1. Install the boot on the vehicle by hooking the boot

Storing the boot1. Position the boot right-side up and fold each side of the boot inward.2. Turn the boot upside down and fold the left side of the bo

To raise the convertible top:1. Bring the vehicle to a complete stop. Key must be in the on position.It is recommended that the vehicle’s engine is ru

ROLLER BLIND SUN SHADE (IF EQUIPPED)If your vehicle is equipped with a glass roof, the roller blind sun shadewill cover the glass roof inside your veh

KEYSYour vehicle may be equipped withtwo integrated keyhead transmitters(IKTs). The key blade functions as aprogrammed key which starts thevehicle and

MYKEY姞The MyKey威 feature allows you to program a restricted driving mode topromote good driving habits. All but one of the keys programmed to thevehic

Create a MyKey威To program MyKey威 on one of the keys programmed to the vehicle,insert the key that you want to make a MyKey威 into the ignition. Forvehi

5. Press SETUP to enter your choice. The next optional setting will bedisplayed.6. Repeat Steps 4 and 5 until you are done changing the optionalsettin